Adjustable Spacer Fittings
BROOKS designs conform to accepted industry dimensions, so bracing connections and mounting hole alignments will interchange with existing system stand.
| Adjustable Spacer Fitting Series |
Steel Thickness (Inches) |
Adjustable Ranges |
| 584 Series | 1/4" Steel | 5840 Series - 8-3/4" to 12-3/4" 5841 Series - 10-3/4" to 14-3/4" 5842 Series - 12-3/4" to 16-3/4" |
| 586 Series | 1/4" Steel | 5860 Series - 8-3/4" to 12-3/4" 5861 Series - 10-3/4" to 14-3/4" 5862 Series - 12-3/4" to 16-3/4" |
| 587 Series | 5/16" Steel | 5870 Series - 8-3/4" to 12-3/4" 5871 Series - 10-3/4" to 14-3/4" 5872 Series - 12-3/4" to 16-3/4" |
Bolts
Brooks offers a wide variety of machine, hex, shoulder eye, and specialty bolts for the utility industry. Manufactured in accordance with ANSI C135.1 and galvanized in accordance with ASTM A153.
- Machine Bolts
- Double End Bolts
- Carriage Bolts
- Double Arming Bolts
- Double Arming Eye Bolts
- Oval Eye Bolts
- Washerhead Bolts
- Welded Shoulder Eye Bolts
Bonding Bolts and Clips
22066 Bonding Bolt
BROOKS 22066, 1/2" x 1-1/2" Bonding Bolt Assembly is used to attach a ground wire to a steel surface where a 9/16" diameter clearance hole is available. This assembly, furnished complete as illustrated, is often used to bond ground wires to shield wire tie angles on H-Frame structures.
325281 Bonding Clips
The 325281 Series Bonding Clips are also used where it is desirable to secure a ground wire to a metal surface. The clips may be ordered individually or as an assembly complete with a 1-1/2" carriage bolt, nut, and locknut.
BC Bonding Clips
The BC Series Bonding Clips provide a simple and inexpensive method of attaching a ground wire to the threaded end of a bolt. The catalog number is for the clip only and the nuts and locknuts required to secure the installation should be ordered separately.
Chain Links
Forged Chain Links
| Catalog Number |
Diameter | Length | Ultimate Strength |
Approx. Wt. Lbs. Each |
| 7751 | 1/2" | 2-1/4" | 30 Kips | 0.5 |
| 7754 | 5/8" | 3" | 40 Kips | 0.8 |
Connecting Links
BROOKS Manufacturing offers a wide variety of connecting links. The attached PDF shows our more common sizes of both straight and bent links (other links are also available). Although typically used in pairs, all links are sold individually.
Dead End Tees
Forged Dead End Tees
The BROOKS 60253 & 60255 Series Forged Dead End Tees can be used to satisfy a multitude of applications in transmission framing, including dead ending conductor, down guying, or as a component in making a pinned connection for Tension Braces and X-Braces in H-Frame structures.
| Catalog Number |
Mounting Holes |
Stem Holes |
Approx. Wt. Lbs. Each |
| 60253A | 15/16" | 15/16" | 6.25 |
| 60253A-1 | 15/16" | 1-1/8" | 6.25 |
| 60253A-2 | 15/16" | 1-1/4" Reamed | 6.25 |
| 60253A-3 | 13/16" | 1-1/4" Reamed | 6.25 |
| 60255 | 1-1/16" | 1-1/4" | 6.25 |
Ultimate Strength Rating: 60,000lbs
Heavy Duty Dead End Tee
BROOKS 41083 Heavy Duty Dead End Tees are primarily used with our 678 Series X-Braces, but may be used in a variety of dead ending applications requiring heavy loads.
Ultimate Strength Rating: 70,000lbs
Guying Dead End Tees
Both of BROOKS 60254 & 41084 Series Combination Tees provide inexpensive and strong units for dual purpose dead ending and guying applications which are subjected to heavy tensions in transmission construction. Please download the PDF above for more details.
Flat Gains and Reinforcing Plates for Wood Crossarms
- 6028 Crossarm Flat Gain
- 6029 Crossarm Ribbed Tie Plate
- 6030 Crossarm Embossed Reinforcing Plate
Grid Gains
BROOKS Manufacturing Co. offers a few varieties of Grid Gains to meet your specific needs.
| PX122 Series | 4" x 4" Grid Gain | PX122 - 15/16" MH PX122A - 1-1/16" MH PX122B - 15/16" MH, Bonded |
| PX260 Series | 4-1/2" x 9" Grid Gain | PX260 - 15/16" MH PX260A - 1-1/16" MH PX260B - 15/16" MH, Bonded PX260C - 15/16" & 1-1/16" MH |
| PX261 Series | 4" x 6-3/4" Grid Gain | PX261 - 15/16" MH PX261A - 1-1/16" MH PX261B - 15/16" MH, Bonded |
Guy Link Assembly
Guy Links and Yoke Plates are typically used in pairs for down guying and connected to Guy Plates, Dead End Tees, or Pole Bands. Components may be ordered individually or as complete assemblies as noted below. The catalog number represents each unit, not pairs. Other Links, Yoke Plates, and Guy Rollers are available.
Link - Single Guy
| Catalog Number |
Approx. Wt. Lbs. Each |
| 22421 | 2.6 |
Yoke Plate - Double Guy
|
Catalog |
Approx. Wt. Lbs. Each |
| 22523 | 5.5 |
Guy Roller
| Catalog Number |
Approx. Wt. Lbs. Each |
| R-26-7 | 0.9 |
| R-31-1 | 1.6 |
Guy Link & Yoke Plate Assemblies
| Catalog Number Material List Per Assembly |
27261 |
27262 |
| 22421 Link | 2 | |
| 22523 Yoke Plate | 2 | |
| R-26-7 Guy Roller | 1 | 2 |
| M7030-2, 7/8" x 3" Bolt | 2 | 3 |
| N7, 7/8" Square Nut | 2 | 3 |
| MF7, Locknut | 2 | 3 |
| Approx. Wt. Lbs. Each | 8.2 | 15.5 |
REA-TG-92: Type 1 Guy Link Assembly (Single Guys) - 27261
REA-TG-92-2: Type 2 Guy Link Assembly (Double Guys) - 27262
Guy Plates
22714 Series 45 Degree Guy Plates
BROOKS 22714 Series Guy Plates offer flexibility to satisfy a number of applications for guying at 45 degrees. From the tables listed below, a combination of hole sizes and bolt spacing may be selected to meet individual requirements.
Guy Rollers
BROOKS Guy Rollers are ductile iron grade 604512 and hot dipped galvanized to ASTM A-153.
Pole Bands
BROOKS PB Series Pole Bands are used for conductor, insulator and guy attachments.
Each pole band series is available in many sizes to accommodate a great range of pole diameters.
Shoulder Eye Bolts and Saddle Assemblies
27091 Series Eye Bolt and Saddle Assemblies
Eye Bolt and Saddle Assemblies are used to attach suspension insulators in single crossarm construction and are available for any crossarm size. The eye bolt is locked securely in place with a nut after threading through the tapped saddle which is made from 3/16" x 4" steel. Assemblies are furnished complete and may be ordered by indicating the appropriate information in the ordering code noted below. The eye bolt length will be a minimum of 1-1/4" longer than the indicated crossarm depth.
Spacer Fitting Brace Connection Bolts
Depending on the style of Spacer Fittings, either bent or straight bolts or double end studs may be required (as shown below). All bolts are shipped with nuts and locknuts factory assembled as illustrated.
7/8" Bent Bolts and Studs
For use with 586 and 587 Adjustable Spacer Fittings
| Catalog Number |
Description | Approx. Wt. Lbs. Each |
| 41058BB | 7/8" x 6" Bent Bolt | 1.5 |
| 41058BS | 7/8" x 8" Bend Stud | 2.0 |
7/8" Straight Bolts and Studs
For use with 584 Adjustable Spacer Fittings
| Catalog Number |
Description | Approx. Wt. Lbs. Each |
| 5840MB | 7/8" x 6-1/2" Bent Bolt | 1.6 |
| 5840DEB | 7/8" x 8-1/2" Bent Stud | 2.1 |
Swinging Angle Brackets
Swinging Angle Brackets are commonly used on line angle structures to maintain clearance between the crossarm and conductor during swing deflection of the insulator string. The swinging action also adds another degree of rotation, thereby eliminating problems associated with unequal tensions. Brackets are furnished complete with pin bolts and fasteners. The Spacer Fittings are not furnished as part of the assembly and must be ordered as separate items.
Bracket & Bolt Only
| Catalog Number |
Length Inches |
Spacing Inches |
Approx. Wt. Lbs. Each |
| 6200 | 12 | 9 | 13 |
| 6201 | 15 | 12 | 15 |
| 6202 | 18 | 15 | 18 |
| 6203 | 21 | 18 | 21 |
U-Plate Only
| Catalog Number |
Spacing Inches |
Bolt Spacing Inches |
Approx. Wt. Lbs. Each |
| 6200U-1 | 9 | 6 | 6.5 |
| 6201U-1 | 12 | 9 | 8.0 |
| 6202U-1 | 15 | 12 | 9.5 |
| 6203U-1 | 18 | 15 | 11.0 |
U-Plate & Bracket Assembly
| Catalog Number |
Length Inches |
Spacing Inches |
Bolt Spacing Inches |
Approx. Wt. Lbs. Each |
| 6200U | 12 | 9 | 6 | 19 |
| 6201U | 15 | 12 | 9 | 23 |
| 6202U | 18 | 15 | 12 | 28 |
| 6203U | 21 | 18 | 15 | 32 |
Turnbuckle Assemblies
The assemblies, manufactured from forged carbon steel, are shipped factory assembled complete with jam nuts. Jaw bolts are furnished complete with the pin bolt, nut, and stainless steel cotter pin.
Brooks most common turnbuckle assemblies are shown below:
| Catalog Number |
Description | Approx. Wt. Lbs. Each |
| TB609-JE | 3/4" x 9" Jaw-Eye Turnbuckle Asm. | 5.2 |
| TB712-JE | 7/8" x 12" Jaw-Eye Turnbuckle Asm. | 8.6 |
U-Bolts
27400 Series U-Bolt and Chain Link Assemblies
The BROOKS 27400 Series U-Bolt and Chain Links are usually assembled on shield wire tie angles commonly used in H-frame construction. The assemblies are furnished standard with 4 hex nuts and 2 locknuts along with the appropriate forged chain link.
| Catalog Number |
Description | Approx. Wt. Lbs. Each |
| 27400 | 5/8" U-Bolt and Nut Assembly | 0.9 |
Washers
- Square Washers (Curved and Flat)
- Tapped Lip Washers
- Spring Washers
- Lock Washers
Welded Washer Nuts
Yoke Plates
BROOKS Manufacturing offers a variety of Yoke Plates. Please download the PDF for more details.
Adjustable Spacer Fittings
Bolts
Bonding Bolts and Clips
Chain Links
Connecting Links
Dead End Tees
Flat Gains and Reinforcing Plates for Wood Crossarms
Grid Gains
Guy Link Assembly
Guy Plates
Guy Rollers
Nuts
Pole Bands
Pole Gain Plates for Wood Crossarms
Shoulder Eye Bolts and Saddle Assemblies
Spacer Fitting Brace Connection Bolts
Swinging Angle Brackets
Turnbuckle Assemblies
U-Bolts
Washers
Welded Washer Nuts
Yoke Plates
