Please use this search to locate any Brooks Manufacturing product using our or competitor’s catalog numbers.
Important Notice: The information presented in the Brooks Manufacturing’s cross-reference tool is based on our best estimate from the manufacturers' published information at the time the information was collected. This information is for suggestion purposes only. We recommend that you completely review our datasheet to confirm device functionality for your application. Brooks Manufacturing is not responsible for any incorrect or incomplete information.
Please contact us at 360-733-1700 should you require further assistance.
Quick Search:
Enter any product part number or sku to search.
You may use * as a wildcard to broaden search results (i.e. searching for 12CC44, you can use *CC4)
| SKU | Company | Description | Product |
|---|---|---|---|
| 3016 | Hughes Brothers | GUARD-POLE HUB 16X30X3/16";GUARD,MATERIAL=GALV ,SIZE=16" X 30" X 3/16",TYPE=POLE,CONSTRUCTION=HUB, 7-1/2" DIA POLE | 3016 |
| 2824 Series | Hughes Brothers | Eye Bolt And Saddle Assemblies | 27091 |
| TG22 | Hughes Brothers | Guy Link Assembly, Type I | 27261 |
| TG22-2 | Hughes Brothers | Guy Link Assembly, Type II | 27262 |
| 2840 Series | Hughes Brothers | Center Clamps | 41010 |
| 1111 | Hughes Brothers | POLE BAND, 7-1/2" - 12 DIA, 4-WAY 90 | 1111 |
| 1150-6-0 | Hughes Brothers | BRACE, CROSSARM, 6' C TO C POLE SPACING, 2-3/4" X 3-1/2" CROSS SECTION, DOUGLAS FIR | 1150-6-0 |
| 1327-A-CPT | Hughes Brothers | BOLT, U-BOLT, STEEL, 5/8"-11 THD, 3" WIDE CENTER TO CENTER, 4-15/16" L INSIDE, GALV, (4) HEX NUTS | 1327-A-CPT |
| 1501.7-16-BCL | Hughes Brothers | BRACKET, STATIC, 3/4" X 16", GALV STEEL, BONDING BOLT, 5 | 1501.7-16-BCL |
| 1501A.7-16-BCL | Hughes Brothers | BRACKET, SHIELD WIRE, 3/4 X 16", 5/8" DIA CHAIN LINK, W/ GRND WIRE BONDING BOLT. | 1501A.7-16-BCL |
| 1501A.7-18-BCL | Hughes Brothers | BRACKET, SHIELD WIRE, 3/4 X 18IN, 5/8IN DIA CHAIN LINK, W/ GND WIRE BONDING BOLT. | 1501A.7-18-BCL |
| A783 Series | Hughes Brothers | Pole Gain Plates | 21847 Series |
| A783.1Q-15 | Hughes Brothers | POLE U-GAIN, 3-5/8" X 9-1/2", 15/16" H | 21847-35-094B |
| A783.1L-15 | Hughes Brothers | POLE U-GAIN, 3-3/4" X 5-3/4", 11/16" H | 21847-36-056-5 |
| A783.1Y-15 | Hughes Brothers | POLE U-GAIN, 5-5/8" X 7-1/2", 15/16" H | 21847-55-074B |
| A783.1N-15 | Hughes Brothers | POLE U-GAIN, 5-3/4" X 5-3/4", 15/16" H | 21847-56-056B |
| GWB51-1/2 | Hughes Brothers | BOND CLIP, 1-3/4" W, 9/16" H, 3/16" T | 22066K |
| 3165 | Hughes Brothers | LINK, FLAT 3/8" X 3", 15/16 MH @ 6 MHC | 22421 |
| 3173 | Hughes Brothers | LINK, FLAT 3/8" X 3", 1-1/8" MH @ 6 MHC | 22421-A |
| 1896 | Hughes Brothers | LINK, GUY TYPE 2, 3/8", (3)-15/16" H | 22523 |
| AS2355-J | Hughes Brothers | PLATE, YOKE, (3) 11/16" HOLES DRILLED AT 4-1/2" X 5" X 5", GALV. STEEL, 30000# UTS | 22523-ASJ |
| AS2355-H | Hughes Brothers | PLATE, YOKE, 3/4" THK X 6" X 4" DROP, 50 KLBS ULT, TRIANGULAR, (4) 1-1/16" HOLES, ONE" EACH CORNER ON 6" CENTERS AND ONE AT THE MIDPOIN OF ONE SIDE. HOLES ON 1-1/2" SETBACK. DROP DISTANCE 4", OVERALL LENGTH 9". | 22524-ASH |
| 2822.2 Series | Hughes Brothers | Guy Plates | 22714 Series |
| 28083 | Hughes Brothers | ROLLER, GUY 3-1/4" D X 1", 1-1/16" H | 23186-1 |
| 2605-H-9 | Hughes Brothers | BRACKET, SHIELD WIRE, POLE TOP, RIDGE IRON, FOR SHIELD WIRE SUPPORT 9IN ABOVE 6-1/2 TO 11IN POLE TOP | 2605-H-9 |
| 1329-A-CPT | Hughes Brothers | U-BOLT 5/8" X 2", (4) NUTS | 27400-1 |
| 1329.5 | Hughes Brothers | BRACKET, SHIELD WIRE, 5/8" U-BOLT & 1/2" CHAIN LINK. | 27400-A |
| 1329.6 | Hughes Brothers | U-Bolt And Chain Links | 27400-B |
| 2751.4A | Hughes Brothers | STUD, INS MTD, 3/4" THREADS, 3/4" X (1-3/4" TO 2-1/2") BOLT, WITH SQ WASHER, SPRING WASHER, NUT AND LOCKNUT, FOR MOUNTING ON STEEL | 2751.4A |
| 2753.2A | Hughes Brothers | INSULATOR MOUNTING STUD 3/4" X 8" | 2753-2A |
| 2755.1A | Hughes Brothers | STUD, INS MTD, 7/8" THREADS, 7/8" X (2" TO 3-7/16)" BOLT, WITH SQ WASHER, SPRING WASHER, NUT AND LOCKNUT, FOR MOUNTING ON STEEL. | 2755.1A |
| 2812.5-10-B1CL | Hughes Brothers | SHIELD WIRE SUPP, 5/8" X 10", WN, LINK | 2812.5-10-B1CL |
| 2812.5-12-B1CL | Hughes Brothers | SHIELD WIRE SUPP, 5/8" X 12", WN,LINK | 2812.5-12-B1CL |
| A1609-14 | Hughes Brothers | SHIELD WIRE SUPP, 3/4" X 14", WN,LINK | 2812.6-14-BCL |
| 2822.2A-13 | Hughes Brothers | PLATE, GUY (2) 13/16" @ 6", 15/16" EYE | 28262-13-13-15 |
| 2831-D | Hughes Brothers | SWING ANG BRKT, 27" X 42" | 2831-D |
| 2842.3C-13 | Hughes Brothers | TEE, GUY, 25K LB ULT, 12" SPACING, 1-1/2" SLOTTED HOLES FOR 3/4" BOLTS. | 2842.3C-13 |
| 2842.7 | Hughes Brothers | SWING ANG BRKT, 15" X 18" W/MTG HW | 2842.7 |
| 2848.2-20 | Hughes Brothers | BOLT, FORGED EYE 7/8" X 20", SN | 2848.2-20 |
| 2848-D | Hughes Brothers | SWING ANG BRKT, 24" X 30", BOLTS, TEE | 2848-D |
| 2848-G | Hughes Brothers | SWING ANG BRKT, 27" X 42", BOLTS, TEE | 2848-G |
| 2848-K | Hughes Brothers | SWING ANG BRKT, 42" X 30", BOLTS, TEE | 2848-K |
| 2890-J Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-A6 Series |
| 2890-A Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-A8 Series |
| 2890-C Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-B10 Series |
| 2890-K Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-B6 Series |
| 2890-F Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-B8 Series |
| 2890-E Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-C10 Series |
| 2890-L Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-C6 Series |
| 2890-B Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-C8 Series |
| 2890-H Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-D10 Series |
| 2890-M Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-D6 Series |
| 2890-G Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3103-D8 Series |
| 2890-J4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-A6 Series |
| 2890-A4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-A8 Series |
| 2890-C4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-B10 Series |
| 2890-K4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-B6 Series |
| 2890-F4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-B8 Series |
| 2890-E4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-C10 Series |
| 2890-L4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-C6 Series |
| 2890-B4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-C8 Series |
| 2890-H4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-D10 Series |
| 2890-M4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-D6 Series |
| 2890-G4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3104-D8 Series |
| 3151 | Hughes Brothers | LINK, BENT 1/4" X 3"; 15/16" & 1-1/4" | 3151 |
| 3152 | Hughes Brothers | LINK, BENT 1/4" X 2"; 15/16" @ 7-1/2" | 3152 |
| 3153 | Hughes Brothers | LINK, BENT 1/4" X 3", 15/16" @ 7" | 3153 |
| 3154 | Hughes Brothers | LINK, BENT 3/8" X 2"; 15/16" @ 7-1/2" | 3154 |
| 3157 | Hughes Brothers | LINK, BENT 3/8" X 3", 1-1/16" @ 9-1/4" | 3157 |
| 3159 | Hughes Brothers | LINK, TWISTED 3/8" X 3"; 15/16" @ 20" | 3159 |
| 2892-B Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3203-A10 Series |
| 2892-A Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3203-A8 Series |
| 2892-D Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3203-B10 Series |
| B2218-B Series | Hughes Brothers | 3 Wire Dead End Assemblies | 3203-C10 Series |
| 2892-B4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3204-A10 Series |
| 2892-A4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3204-A8 Series |
| 2892-D4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3204-B10 Series |
| B2218-B4 Series | Hughes Brothers | 4 Wire Dead End Assemblies | 3204-C10 Series |
| 2718 Series | Hughes Brothers | Bonding Clips And Bolts | 325281 Series |
| 2891 Series | Hughes Brothers | H-Frame Dead End Assemblies | 3300 Series |
| B23 | Hughes Brothers | Dead End Guying Attachments | 3400 Series |
| 1153 Series | Hughes Brothers | Crossarm Braces | 346K Series |
| 2056 Series | Hughes Brothers | X-Braces | 41005 Series |
| Series 2056 | Hughes Brothers | X-BR OUTSIDE 3-5/8" X 8-1/2", 6 TAPS | 41005-1 |
| Series 2056 | Hughes Brothers | X-BR REINF INSIDE 3-5/8" X 8-1/2",LUG | 41005-2 |
| Series 2056 | Hughes Brothers | WSHR, POLE 5" X 9" X 1/4", (2) 15/16" H | 41005-3 |
| 1096 Series | Hughes Brothers | Alley Arm Braces | 41018 Series |
| 2722.1B-B | Hughes Brothers | BOLT, BENT MB 7/8" X 6", SN, MF, 3" CT | 41058BB |
| 2722.1D-B | Hughes Brothers | BOLT, BENT DE 7/8" X 8", 2SN, 2MF | 41058BS |
| 1906 Series | Hughes Brothers | LINK, CLEVIS 3/8" X 2", (3)-15/16 DIA | 41074 |
| 2017 Series | Hughes Brothers | Crossarm Braces | 411 Series |
| 2017 Series | Hughes Brothers | VB EF, 2-3/4" X 3-1/2", A37, 13/16" MH | 411A-376 |
| 2017 Series | Hughes Brothers | VB EF, 2-3/4" X 3-1/2", A45, 13/16" MH | 411A-456 |
| 2017 Series | Hughes Brothers | STR EF, 2-3/4" X 3-1/2", 3", 13/16" MH | 411B-6 |
| 2017 Series | Hughes Brothers | WSHR PL, 2-3/4" X 3-1/2", 1/2" TAP | 411C |
| 2018 Series | Hughes Brothers | Crossarm Braces | 412 Series |
| 2018.5 Series | Hughes Brothers | Crossarm Braces | 413 Series |
| 1135 Knee Series | Hughes Brothers | Knee Braces | 414 Series |
| 2025 Knee Series | Hughes Brothers | Knee Braces | 415 Series |
| 2025.5 Knee Series | Hughes Brothers | Knee Braces | 416 Series |
| 1135 Vee Series | Hughes Brothers | Vee Braces | 417 Series |
| 2025 Vee Series | Hughes Brothers | Vee Braces | 418 Series |
| 2025 BDV 10.5.7 | Hughes Brothers | BRACE, VEE, 8' 9-3/4 " CENTER TO CENTER HOLES (8' 2-1/2" W.L.), 37-1/2 DEG. AND 52-1/2 DEG. FITTINGS | 418-F7M7-08096 |
| 2025CCV102 | Hughes Brothers | BRACE, VEE, SPECIAL, 3-3/4" X 5-3/4" X 7'-11" W.L., 8'-6-1/4" C.C.HOLE SPACING | 418-J7J7-08062 |
| 2025CCV109 | Hughes Brothers | BRACE, VEE, 3-3/4 " X 5-3/4" X 8'-6" W.L., 9'-1-1/4" C.C. HOLE SPACING | 418-J7J7-09012 |
| 2025.5 Vee Series | Hughes Brothers | Vee Braces | 419 Series |
| 2038E Series | Hughes Brothers | Tension Braces | 424 Series |
| 2038-B Vee Series | Hughes Brothers | Vee Braces | 425 Series |
| 2038-C Vee Series | Hughes Brothers | Vee Braces | 426 Series |
| 2038-B Knee Series | Hughes Brothers | Knee Braces | 429 Series |
| 2038-C Knee Series | Hughes Brothers | Knee Braces | 430 Series |
| 1138-NR Series | Hughes Brothers | Tension Braces | 431 Series |
| 2016 Series | Hughes Brothers | Crossarm Braces | 432 Series |
| 2010 Knee Series | Hughes Brothers | Knee Braces | 433 Series |
| 2038A Series | Hughes Brothers | Tension Vee Braces | 435 Series |
| 2038TB Series | Hughes Brothers | Tension Vee Braces | 435 Series |
| 2038 Series | Hughes Brothers | TENS EF 3-1/2" X 4-1/2", 1" MH | 43500-1A |
| 2038 Series | Hughes Brothers | TENS EF 3-1/2" X 4-1/2", 1" MH | 43500-1B |
| 2043 Series | Hughes Brothers | Tension Braces | 436 Series |
| 2045 Series | Hughes Brothers | Reversible Crossarm Braces | 446 Series |
| 3400 Series | Hughes Brothers | Spacer Fittings - Adjustable | 584 Series |
| 3414 Series | Hughes Brothers | Spacer Fittings, Adjustable | 586 Series |
| 3415 Series | Hughes Brothers | Spacer Fittings, Adjustable | 587 Series |
| 2817 Series | Hughes Brothers | Dead End Tees | 60253 Series |
| 2817-S-15 | Hughes Brothers | TEE, DE 15/16 @ 6", 15/16 EYE | 60253A |
| 2817-D | Hughes Brothers | TEE, DE 15/16 @ 6", 1-1/8 EYE | 60253A-1 |
| 2817-15 | Hughes Brothers | TEE, DE 15/16 @ 6", 1-1/4 EYE | 60253A-2 |
| 2817-13 | Hughes Brothers | TEE, DE 13/16 @ 6", 1-1/4 EYE | 60253A-3 |
| 2816-15 | Hughes Brothers | TEE, DE & GUY 15/16 @ 6", 1-1/4 EYES | 60254 |
| 2816 Series | Hughes Brothers | Dead End And Guying Tees | 60254 Series |
| 1004 Series | Hughes Brothers | Flat Gain Plates | 6028 Series |
| 1004.81 | Hughes Brothers | FLAT GAIN, 1/4" X 3" X 9-1/2", 15/16 H | 6028-094B |
| 1005 Series | Hughes Brothers | Ribbed Tie Plates | 6029 Series |
| 1005.895 | Hughes Brothers | RIBBED TIE, 1/4" X 3" X 9", 15/16H | 6029-090B |
| 1005.81 | Hughes Brothers | RIBBED TIE, 1/4" X 3" X 9-1/2", 15/16H | 6029-094B |
| 1113 Series | Hughes Brothers | Embossed Reinforcing Plate | 6030 Series |
| 1113.88 | Hughes Brothers | REINF PL, 1/4 X 4 X 7-1/2, 15/16 H | 6030-074B |
| 2067 Series | Hughes Brothers | X-Braces | 6050 Series |
| 2094 Series | Hughes Brothers | X-Braces | 6051 Series |
| 2138 Series | Hughes Brothers | X-Braces | 6052 Series |
| 2821 Series | Hughes Brothers | Swinging Angle Brackets | 6200 Series |
| 2822 Series | Hughes Brothers | Swinging Angle Brackets | 6200U Series |
| 2823 Series | Hughes Brothers | Swinging Angle Brackets | 6200U Series |
| 2821.6 | Hughes Brothers | SWING ANG BRKT, 12" X 15" W/ BOLT | 6201-1 |
| LW50T | Hughes Brothers | WSHR, TAPPED LIP 1/2" | 64596-4 |
| LW60T | Hughes Brothers | WSHR, TAPPED LIP 5/8" | 64596-5 |
| LW70T | Hughes Brothers | WSHR, TAPPED LIP 3/4" | 64596-6 |
| 1042 (3-3/8" X 4-3/8") | Hughes Brothers | X-Braces | 6680 Series |
| 1042 (3-3/8" X 5-3/8") | Hughes Brothers | X-Braces | 6685 Series |
| 2061-A Series | Hughes Brothers | X-Braces | 6695 Series |
| 2124 Series | Hughes Brothers | X-Braces | 670 Series |
| 2132 Series | Hughes Brothers | X-Braces | 670 Series |
| 2093B Series | Hughes Brothers | X-Braces | 670B Series |
| 2121 Series | Hughes Brothers | X-Braces | 670B Series |
| 2096B Series | Hughes Brothers | X-Braces | 670C Series |
| 2096 Series | Hughes Brothers | X-Braces | 670C Series |
| 2096A Series | Hughes Brothers | X-Braces | 670D Series |
| 2093A Series | Hughes Brothers | X-Braces | 671A Series |
| 2093C Series | Hughes Brothers | X-Braces | 671C Series |
| 2093 Series | Hughes Brothers | X-Braces | 671D Series |
| 2093K Series | Hughes Brothers | X-Braces | 671D Series |
| 2097 Series | Hughes Brothers | X-Braces | 671F Series |
| 2123 Series | Hughes Brothers | X-Braces | 671F Series |
| 2095 Series | Hughes Brothers | X-Braces | 671G Series |
| 2095K Series | Hughes Brothers | X-Braces | 671G Series |
| 2086 Series | Hughes Brothers | X-Braces | 675 Series |
| 2077 Series | Hughes Brothers | X-Braces | 675A Series |
| 2086A Series | Hughes Brothers | X-Braces | 675B Series |
| 2087 Series | Hughes Brothers | X-Braces | 675C Series |
| 7130 | Hubbell | BENT PL, 5-1/8" WS, 11/16", 9/8" MH | 677-3AB |
| 2131 Series | Hughes Brothers | X-Braces | 678 Series |
| 2122 Series | Hughes Brothers | X-Braces | 678B Series |
| 7130 | Hubbell | FLAT STEEL BRACE, 30", 7/16 & 9/16 | 7130 |
| J7130 | Maclean | FLAT STEEL BRACE, 30", 7/16 & 9/16 | 7130 |
| 1329-B1 | Hughes Brothers | LINK, 1/2" CHAIN | 7751 |
| CL-4 | Maclean | LINK, 1/2" CHAIN | 7751 |
| 1329-B | Hughes Brothers | LINK, 5/8" CHAIN | 7754 |
| CL-5 | Maclean | LINK, 5/8" CHAIN | 7754 |
| A2132-E | Hughes Brothers | DEADEND & GUYING TEE | A2132-E |
| A2132-F1 | Hughes Brothers | DEADEND & GUYING TEE FOR MULTI-SIDED STEEL POLE | A2132-F1 |
| 2840.1B | Hughes Brothers | CLAMP STUD 6-3/4", 2 SN & 2 MF | A41010-1 |
| 2840.1G | Hughes Brothers | CLAMP STUD 11-1/4", 2 SN & 2 MF | A41010-13 |
| 2840.1C | Hughes Brothers | CLAMP STUD 7-1/2", 2 SN & 2 MF | A41010-4 |
| 2840.1L | Hughes Brothers | CLAMP STUD 12", 2 SN & 2 MF | A41010-7 |
| ANB1016-6B3GF | Hughes Brothers | BOLT, ANCHOR, 1" X 16", WITH 3" HOOK, STD STRENGTH, ASTM A-307 STEEL, HOT DIP GALVANIZED WITH 2 NUTS, 4" THREAD LENGTH, 19" LONG BEFORE BENDING | ANB1016-6B3GF |
| AS2531.1D | Hughes Brothers | KEY, COTTER, 3/16" X 1-1/4" LENGTH | AS2531.1D |
| AS2585-A | Hughes Brothers | PLATE, YOKE, 12" W X 4" H X 1/2" THICK, 30K LBS ULT, (3) 13/16" DIA HOLES | AS2585-A |
| AS2585-J | Hughes Brothers | PLATE, YOKE, DELTA, 8 1/2" BASE C-C X 4 1/4" X 5/8" THICK, 30K# ULTIMATE STRENGTH, (3) 1 1/4" HOLES & (1) 15/16" APEX HOLE | AS2585-J |
| AS2585-Z | Hughes Brothers | PLATE, YOKE, 18" W X 6 1/4" H X 5/8" THICK, 40K LBS ULT, (2) 13/16" & (1) 1" HOLE, TO FIT DOUBLE AGS FOR 1/0 T-2 RAVEN | AS2585-Z |
| AS2613.16A | Hughes Brothers | BRACKET, SUPPORT, GROUND WIRE, GALVANIZED, ANGLE 2-1/2" X 2-1/2" X 36" | AS2613-16A |
| AS2613-F1 | Hughes Brothers | BAYONET, STEEL, SHIELD WIRE, CORNER, 36", ULT TRANSVERSE LOAD RATING 575 LBS | AS2613-F1 |
| AS2613-H1 | Hughes Brothers | BRACKET, SUPPORT(GOOSENECK), SHIELD WIRE | AS2613-H1 |
| 2840.2C | Hughes Brothers | CLAMP STRAP, 7-5/8" MHC; 4-3/8" WS | B41010-1 |
| 2840.2F | Hughes Brothers | CLAMP STRAP, 9" MHC; 5-3/8" WS | B41010-2 |
| 2840.2I | Hughes Brothers | CLAMP STRAP, 13-1/2" MHC; 8-1/2" WS | B41010-3 |
| 2840.2G | Hughes Brothers | CLAMP STRAP, 9-5/8" MHC; 5-3/4" WS | B41010-4 |
| 2727 Series | Hughes Brothers | Bonding Clips | BC Series |
| 2727.5 | Hughes Brothers | BOND U-CLIP, 1/2 BOLT, 3/16 T | BC4 |
| 2727.6 | Hughes Brothers | BOND U-CLIP, 5/8" BOLT, 3/16 T | BC5 |
| 2727.7 | Hughes Brothers | BOND U-CLIP, 3/4" BOLT, 3/16 T | BC6 |
| 2727.8 | Hughes Brothers | BOND U-CLIP, 7/8" BOLT, 3/16 T | BC7 |
| 2501.8 | Hughes Brothers | Ground Wire Moulding | BR100-08 |
| 2502.8 | Hughes Brothers | Ground Wire Moulding | BR200-08 |
| 2503.8 | Hughes Brothers | Ground Wire Moulding | BR300-08 |
| BC Series | Hughes Brothers | Carriage Bolts | C Series |
| BC34-1/2-F | Hughes Brothers | BOLT, CARRIAGE 3/8" X 4-1/2" | C3044-1.6 |
| 863412 | Hubbell | BOLT, CARRIAGE 3/8" X 4-1/2" | C3044-1.6 |
| BC36-F | Hughes Brothers | BOLT, CARRIAGE 3/8" X 6" | C3060-1.6 |
| BC53-F | Hughes Brothers | BOLT, CARRIAGE 1/2" X 3" | C4030-3 |
| TR-F Series | Hughes Brothers | Double Arming Bolts | DA Series |
| TR638-F | Hughes Brothers | BOLT, DBL ARM, 5/8" X 38", 4 SN | DA5380-S4 |
| TR724-F | Hughes Brothers | BOLT, DBL ARM 3/4" X 24", 4 SN | DA6240-S4 |
| 8894 | Hubbell | BOLT, DBL ARM 3/4" X 24", 4 SN | DA6240-S4 |
| J8894 | Maclean | BOLT, DBL ARM 3/4" X 24", 4 SN | DA6240-S4 |
| TR726-F | Hughes Brothers | BOLT, DBL ARM 3/4" X 26", 4 SN | DA6260-S4 |
| 8896 | Hubbell | BOLT, DBL ARM 3/4" X 26", 4 SN | DA6260-S4 |
| J8896 | Maclean | BOLT, DBL ARM 3/4" X 26", 4 SN | DA6260-S4 |
| TR728-F | Hughes Brothers | BOLT, DBL ARM 3/4" X 28" | DA6280 |
| 8897 | Hubbell | BOLT, DBL ARM 3/4" X 28" | DA6280 |
| J8897 | Maclean | BOLT, DBL ARM 3/4" X 28" | DA6280 |
| TR818-F | Hughes Brothers | BOLT, DBL ARM, 7/8" X 18", 4 SN | DA7180-S4 |
| PSDA781800 | Hubbell | BOLT, DBL ARM, 7/8" X 18", 4 SN | DA7180-S4 |
| TR836-F | Hughes Brothers | BOLT, DBL ARM, 7/8" " X 36", 4 SN | DA7360-4-S4 |
| PSDA783600 | Hubbell | BOLT, DBL ARM, 7/8" " X 36", 4 SN | DA7360-4-S4 |
| TR-5 | Hughes Brothers | Double End Bolts | DE Series |
| TR822-5 | Hughes Brothers | BOLT, DBL END 7/8" X 22" | DE7220-6 |
| TR824-5 | Hughes Brothers | BOLT, DBL END 7/8" X 24", 2 SN | DE7240-6S2 |
| TR826-5 | Hughes Brothers | BOLT, DBL END 7/8" X 26", 2 SN | DE7260-6S2 |
| TR828-5 | Hughes Brothers | BOLT, DBL END 7/8" X 28", 2 SN | DE7280-6S2 |
| TR830-5 | Hughes Brothers | BOLT, DBL END 7/8" X 30" | DE7300-6 |
| EN Series | Hughes Brothers | Eye Nuts | EN Series |
| EN70 | Hughes Brothers | EYENUT, OVAL 3/4" | EN6 |
| 6503 | Hubbell | EYENUT, OVAL 3/4" | EN6 |
| J1093 | Maclean | EYENUT, OVAL 3/4" | EN6 |
| EN80 | Hughes Brothers | EYENUT, OVAL 7/8" | EN7 |
| 2045-AB45-9-11 | Hughes Brothers | 446 REV BRACE,37" SPAN 18-1/2" DROP | H446-37-184 |
| 2045-CC30-9-11 | Hughes Brothers | 446 REV BRACE, 60" SPAN X 18" DROP | H446-60-18 |
| JA4760R | Maclean | 446 REV BRACE, 60" SPAN X 18" DROP | H446-60-18 |
| 2045-D45-9-11 | Hughes Brothers | 446 REV BRACE, 60" SPAN X 30" DROP | H446-60-30 |
| 2045-EE30-9-11 | Hughes Brothers | 446 REV BRACE, 72" SPAN 22" DROP | H446-72-22 |
| 2045-E45-9-11 | Hughes Brothers | 446 REV BRACE, 72" SPAN X 36" DROP | H446-72-36 |
| 2023 | Hughes Brothers | WOOD BRACE SET, 1" X 2" X 26" C-C | HB-2023 |
| LS34 | Hughes Brothers | LAG SCREW, 3/8" X 4" | LS304 |
| LS404 | Hughes Brothers | LAG SCREW, 1/2" X 4" | LS404 |
| LS64 | Hughes Brothers | LAG SCREW, 5/8" X 4" | LS504 |
| SLW Series | Hughes Brothers | Lock Washers | LW Series |
| SLW2-60 | Hughes Brothers | WSHR, DOUBLE COIL SPRING LOCK, 5/8" | LW2-5 |
| C2050186 | Hubbell | WSHR, DOUBLE COIL SPRING LOCK, 5/8" | LW2-5 |
| J177 | Maclean | WSHR, DOUBLE COIL SPRING LOCK, 5/8" | LW2-5 |
| SLW2-70 | Hughes Brothers | WSHR, DOUBLE COIL SPRING LOCK 3/4" | LW2-6 |
| C2050187 | Hubbell | WSHR, DOUBLE COIL SPRING LOCK 3/4" | LW2-6 |
| J178 | Maclean | WSHR, DOUBLE COIL SPRING LOCK 3/4" | LW2-6 |
| SLW2-80 | Hughes Brothers | WSHR, DOUBLE COIL SPRING LOCK 7/8" | LW2-7 |
| PSC2050496 | Hubbell | WSHR, DOUBLE COIL SPRING LOCK 7/8" | LW2-7 |
| SLW2-100 | Hughes Brothers | WSHR, DOUBLE COIL SPRING LOCK, 1" | LW2-8 |
| SLW100 | Hughes Brothers | WSHR, SPRING LOCK 1" | LW8 |
| PSC2050497 | Hubbell | WSHR, SPRING LOCK 1" | LW8 |
| B Series | Hughes Brothers | Machine Bolts | M Series |
| AB1226-8 | Hughes Brothers | BOLT, MACHINE, 1-1/4" X 26" , SN | M10026-6S |
| B51-1/2-1-1/4 | Hughes Brothers | BOLT, MACHINE 1/2" X 1-1/2" | M4014-1.2 |
| 870112 | Hubbell | BOLT, MACHINE 1/2" X 1-1/2" | M4014-1.2 |
| J8701-1/2 | Maclean | BOLT, MACHINE 1/2" X 1-1/2" | M4014-1.2 |
| B51-3/4-1-1/4 | Hughes Brothers | BOLT, MACHINE 1/2" X 1-3/4" | M4016-1.6 |
| B52-1-1/4 | Hughes Brothers | BOLT, MACHINE, 1/2" X 2" | M4020-1 |
| 8702 | Hubbell | BOLT, MACHINE, 1/2" X 2" | M4020-1 |
| J8702 | Maclean | BOLT, MACHINE, 1/2" X 2" | M4020-1 |
| B53-1-1/4 | Hughes Brothers | BOLT, MACHINE 1/2" X 3" | M4030-1 |
| 8703 | Hubbell | BOLT, MACHINE 1/2" X 3" | M4030-1 |
| J8703 | Maclean | BOLT, MACHINE 1/2" X 3" | M4030-1 |
| B55-1-3/4 | Hughes Brothers | BOLT, MACHINE 1/2" X 5" | M4050-3 |
| 8705 | Hubbell | BOLT, MACHINE 1/2" X 5" | M4050-3 |
| J8705 | Maclean | BOLT, MACHINE 1/2" X 5" | M4050-3 |
| 8709 | Hubbell | BOLT, MACHINE 1/2" X 9" | M4090-4 |
| J8709 | Maclean | BOLT, MACHINE 1/2" X 9" | M4090-4 |
| B511 | Hughes Brothers | BOLT, MACHINE 1/2" X 11", SN | M4110-4S |
| B514-6 | Hughes Brothers | BOLT, MACHINE 1/2" X 14", SN | M4140-6S |
| J8714 | Maclean | BOLT, MACHINE 1/2" X 14", SN | M4140-6S |
| B61-1/2-1-1/4 | Hughes Brothers | BOLT, MACHINE 5/8"-11 X 1 1/2", SN | M5014-1.2S |
| B63-3 | Hughes Brothers | BOLT, MACHINE 5/8" X 3", SN | M5030-6S |
| PS8803 | Hubbell | BOLT, MACHINE 5/8" X 3", SN | M5030-6S |
| J8803 | Maclean | BOLT, MACHINE 5/8" X 3", SN | M5030-6S |
| B64-1/2 | Hughes Brothers | BOLT, MACHINE 5/8" X 4-1/2" | M5044-2 |
| B65-1-1/2 | Hughes Brothers | BOLT, MACHINE 5/8" X 5" | M5050-3 |
| 8805 | Hubbell | BOLT, MACHINE 5/8" X 5" | M5050-3 |
| J8805 | Maclean | BOLT, MACHINE 5/8" X 5" | M5050-3 |
| B65-1/2 | Hughes Brothers | BOLT, MACHINE 5/8" X 5-1/2" | M5054-3 |
| B66-1-1/2 | Hughes Brothers | BOLT, MACHINE 5/8" X 6" | M5060-3 |
| 8806 | Hubbell | BOLT, MACHINE 5/8" X 6" | M5060-3 |
| J8806 | Maclean | BOLT, MACHINE 5/8" X 6" | M5060-3 |
| B66-1/2 | Hughes Brothers | BOLT, MACHINE 5/8" X 6-1/2" | M5064-3 |
| B67-3 | Hughes Brothers | BOLT, MACHINE 5/8" X 7" | M5070-3 |
| 8807 | Hubbell | BOLT, MACHINE 5/8" X 7" | M5070-3 |
| J8807 | Maclean | BOLT, MACHINE 5/8" X 7" | M5070-3 |
| B67-1/2 | Hughes Brothers | BOLT, MACHINE 5/8" X 7-1/2" | M5074-3 |
| B69 | Hughes Brothers | BOLT, MACHINE 5/8" X 9" | M5090-4 |
| 8809 | Hubbell | BOLT, MACHINE 5/8" X 9" | M5090-4 |
| J8809 | Maclean | BOLT, MACHINE 5/8" X 9" | M5090-4 |
| B610-4 | Hughes Brothers | BOLT, MACHINE 5/8" X 10" | M5100-4 |
| 8810 | Hubbell | BOLT, MACHINE 5/8" X 10" | M5100-4 |
| J8810 | Maclean | BOLT, MACHINE 5/8" X 10" | M5100-4 |
| B611 | Hughes Brothers | BOLT, MACHINE 5/8" X 11" | M5110-4 |
| B612-4 | Hughes Brothers | BOLT, MACHINE 5/8" X 12", SN | M5120-6S |
| 8812 | Hubbell | BOLT, MACHINE 5/8" X 12", SN | M5120-6S |
| J8812 | Maclean | BOLT, MACHINE 5/8" X 12", SN | M5120-6S |
| B614-6 | Hughes Brothers | BOLT, MACHINE 5/8" X 14", SN | M5140-6S |
| 8814 | Hubbell | BOLT, MACHINE 5/8" X 14", SN | M5140-6S |
| J8814 | Maclean | BOLT, MACHINE 5/8" X 14", SN | M5140-6S |
| 8816 | Hubbell | BOLT, MACHINE 5/8" X 16", SN | M5160-6S |
| J8816 | Maclean | BOLT, MACHINE 5/8" X 16", SN | M5160-6S |
| B73-1-3/4 | Hughes Brothers | BOLT, MACHINE 3/4" X 3" | M6030-2.4 |
| PS8903 | Hubbell | BOLT, MACHINE 3/4" X 3" | M6030-2.4 |
| J8903 | Maclean | BOLT, MACHINE 3/4" X 3" | M6030-2.4 |
| B74-2 | Hughes Brothers | BOLT, MACHINE 3/4" X 4" | M6040-3 |
| B76-1/2 | Hughes Brothers | BOLT, MACHINE 3/4" X 6-1/2" | M6064-3 |
| DF5B12 | Hubbell | BOLT, MACHINE 3/4" X 6-1/2" | M6064-3 |
| B77-3 | Hughes Brothers | BOLT, MACHINE 3/4" X 7" | M6070-3 |
| DF4B7 | Hubbell | BOLT, MACHINE 3/4" X 7" | M6070-3 |
| B78-4 | Hughes Brothers | BOLT, MACHINE 3/4" X 8" | M6080-4 |
| 8908 | Hubbell | BOLT, MACHINE 3/4" X 8" | M6080-4 |
| J8908 | Maclean | BOLT, MACHINE 3/4" X 8" | M6080-4 |
| B79 | Hughes Brothers | BOLT, MACHINE 3/4" X 9" | M6090-4 |
| B710-4 | Hughes Brothers | BOLT, MACHINE 3/4" X 10" | M6100-4 |
| 8910 | Hubbell | BOLT, MACHINE 3/4" X 10" | M6100-4 |
| J8910 | Maclean | BOLT, MACHINE 3/4" X 10" | M6100-4 |
| B712-6 | Hughes Brothers | BOLT, MACHINE 3/4" X 12" | M6120-6 |
| 8912 | Hubbell | BOLT, MACHINE 3/4" X 12" | M6120-6 |
| J8912 | Maclean | BOLT, MACHINE 3/4" X 12" | M6120-6 |
| B714-6 | Hughes Brothers | BOLT, MACHINE 3/4" X 14", SN | M6140-6S |
| 8914 | Hubbell | BOLT, MACHINE 3/4" X 14", SN | M6140-6S |
| J8914 | Maclean | BOLT, MACHINE 3/4" X 14", SN | M6140-6S |
| B716-6 | Hughes Brothers | BOLT, MACHINE 3/4" X 16", SN | M6160-6S |
| 8916 | Hubbell | BOLT, MACHINE 3/4" X 16", SN | M6160-6S |
| J8916 | Maclean | BOLT, MACHINE 3/4" X 16", SN | M6160-6S |
| B718-6 | Hughes Brothers | BOLT, MACHINE 3/4" X 18", SN | M6180-6S |
| 8918 | Hubbell | BOLT, MACHINE 3/4" X 18", SN | M6180-6S |
| J8918 | Maclean | BOLT, MACHINE 3/4" X 18", SN | M6180-6S |
| B726-6 | Hughes Brothers | BOLT, MACHINE 3/4" X 26", SN | M6260-6S |
| 8926 | Hubbell | BOLT, MACHINE 3/4" X 26", SN | M6260-6S |
| J8926 | Maclean | BOLT, MACHINE 3/4" X 26", SN | M6260-6S |
| B728-8 | Hughes Brothers | BOLT, MACHINE 3/4" X 28", SN | M6280-6S |
| 8928 | Hubbell | BOLT, MACHINE 3/4" X 28", SN | M6280-6S |
| J8928 | Maclean | BOLT, MACHINE 3/4" X 28", SN | M6280-6S |
| B730-8 | Hughes Brothers | BOLT, MACHINE, 3/4" X 30" | M6300-6S |
| 8930 | Hubbell | BOLT, MACHINE, 3/4" X 30" | M6300-6S |
| B736-8 | Hughes Brothers | BOLT, MACHINE, 3/4"-10UNC X 36", 6" THD, SN | M6360-6S |
| B83-2 | Hughes Brothers | BOLT, MACHINE 7/8" X 3" | M7030-2 |
| B83-1/2D-2 | Hughes Brothers | (COTTER PIN) BOLT, ROLLER, 7/8" X 3-1/2" LG, 2" THREAD, GALV A36 STEEL, SQUARE HEAD W/ SQUARE NUT & STAINLESS STEEL COTTER PIN | M70304-2S-D-2 |
| B84D-2 | Hughes Brothers | BOLT, MACHINE 7/8" X 4", SN, 9/32 CH | M7040-2SC |
| PSSB780400 | Hubbell | BOLT, MACHINE 7/8" X 4", SN, 9/32 CH | M7040-2SC |
| B85-1/2 | Hughes Brothers | BOLT, MACHINE 7/8" X 5-1/2", SN | M7054-3S |
| B86-2-1/2 | Hughes Brothers | BOLT, MACHINE 7/8" X 6" | M7060-3 |
| PSSB780600 | Hubbell | BOLT, MACHINE 7/8" X 6" | M7060-3 |
| B88-3 | Hughes Brothers | BOLT, MACHINE 7/8" X 8", SN | M7080-4S |
| PSSB780800 | Hubbell | BOLT, MACHINE 7/8" X 8", SN | M7080-4S |
| B810-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 10", SN | M7100-4S |
| PSSB78100 | Hubbell | BOLT, MACHINE 7/8" X 10", SN | M7100-4S |
| B812-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 12", SN | M7120-6S |
| DF5B12 | Hubbell | BOLT, MACHINE 7/8" X 12", SN | M7120-6S |
| J9062 | Maclean | BOLT, MACHINE 7/8" X 12", SN | M7120-6S |
| B814-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 14", SN | M7140-6S |
| C2050254 | Hubbell | BOLT, MACHINE 7/8" X 14", SN | M7140-6S |
| J9064 | Maclean | BOLT, MACHINE 7/8" X 14", SN | M7140-6S |
| B816-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 16", SN | M7160-6S |
| C2050255 | Hubbell | BOLT, MACHINE 7/8" X 16", SN | M7160-6S |
| J9066 | Maclean | BOLT, MACHINE 7/8" X 16", SN | M7160-6S |
| B818-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 18", SN | M7180-6S |
| C2050256 | Hubbell | BOLT, MACHINE 7/8" X 18", SN | M7180-6S |
| J9068 | Maclean | BOLT, MACHINE 7/8" X 18", SN | M7180-6S |
| B820-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 20", SN | M7200-6S |
| C2050257 | Hubbell | BOLT, MACHINE 7/8" X 20", SN | M7200-6S |
| J9070 | Maclean | BOLT, MACHINE 7/8" X 20", SN | M7200-6S |
| B822-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 22", SN | M7220-6S |
| C2050258 | Hubbell | BOLT, MACHINE 7/8" X 22", SN | M7220-6S |
| J9072 | Maclean | BOLT, MACHINE 7/8" X 22", SN | M7220-6S |
| B824-6 | Hughes Brothers | BOLT, MACHINE 7/8" X 24", SN | M7240-6S |
| DF5B24 | Hubbell | BOLT, MACHINE 7/8" X 24", SN | M7240-6S |
| J9074 | Maclean | BOLT, MACHINE 7/8" X 24", SN | M7240-6S |
| B826-8 | Hughes Brothers | BOLT, MACHINE 7/8" X 26", SN | M7260-6S |
| PSSB782600 | Hubbell | BOLT, MACHINE 7/8" X 26", SN | M7260-6S |
| J9076 | Maclean | BOLT, MACHINE 7/8" X 26", SN | M7260-6S |
| B828-8 | Hughes Brothers | BOLT, MACHINE 7/8" X 28", SN | M7280-6S |
| PSSB782800 | Hubbell | BOLT, MACHINE 7/8" X 28", SN | M7280-6S |
| B830-8 | Hughes Brothers | BOLT, MACHINE, 7/8" X 30", SN | M7300-6S |
| PSSB783000 | Hubbell | BOLT, MACHINE, 7/8" X 30", SN | M7300-6S |
| B103-2 | Hughes Brothers | BOLT, MACHINE 1" X 3", 1-3/4" THD | M8030-1.6 |
| B103-1/2-2-1/2 | Hughes Brothers | BOLT, MACHINE 1" X 3-1/2", SN | M8034-2.2S |
| B104-2-3/4 | Hughes Brothers | BOLT, MACHINE, 1" X 4" , SN | M8040-2.2S |
| PSSB100400 | Hubbell | BOLT, MACHINE, 1" X 4" , SN | M8040-2.2S |
| B105-3 | Hughes Brothers | BOLT, MACHINE 1" X 5", SN | M8050-2.2S |
| PSSB100500 | Hubbell | BOLT, MACHINE 1" X 5", SN | M8050-2.2S |
| B1014-6 | Hughes Brothers | BOLT, MACHINE 1" X 14", SN | M8140-6S |
| PSSB101400 | Hubbell | BOLT, MACHINE 1" X 14", SN | M8140-6S |
| B1016-6 | Hughes Brothers | BOLT, MACHINE 1" X 16", SN | M8160-6S |
| PSSB101600 | Hubbell | BOLT, MACHINE 1" X 16", SN | M8160-6S |
| B1018-6 | Hughes Brothers | BOLT, MACHINE 1" X 18", SN | M8180-6S |
| PSSB101800 | Hubbell | BOLT, MACHINE 1" X 18", SN | M8180-6S |
| B1020-6 | Hughes Brothers | BOLT, MACHINE 1" X 20", SN | M8200-6S |
| PSSB102000 | Hubbell | BOLT, MACHINE 1" X 20", SN | M8200-6S |
| B1022-6 | Hughes Brothers | BOLT, MACHINE 1" X 22", SN | M8220-6S |
| PSSB102200 | Hubbell | BOLT, MACHINE 1" X 22", SN | M8220-6S |
| B1024-6 | Hughes Brothers | BOLT, MACHINE, 1" X 24" , SN | M8240-4S |
| PSSB102400 | Hubbell | BOLT, MACHINE, 1" X 24" , SN | M8240-4S |
| B1028-8 | Hughes Brothers | BOLT, MACHINE, 1" X 28", SN | M8280-6S |
| PSSB102800 | Hubbell | BOLT, MACHINE, 1" X 28", SN | M8280-6S |
| MF Series | Hughes Brothers | MF Locknuts | MF Series |
| J8581 | Maclean | LOCKNUT, 3/8" SQ MF | MF3 |
| MF50 | Hughes Brothers | LOCKNUT, 1/2" SQ MF | MF4 |
| 3511 | Hubbell | LOCKNUT, 1/2" SQ MF | MF4 |
| J8582 | Maclean | LOCKNUT, 1/2" SQ MF | MF4 |
| MF60 | Hughes Brothers | LOCKNUT, 5/8" SQ MF | MF5 |
| 3512 | Hubbell | LOCKNUT, 5/8" SQ MF | MF5 |
| J8583 | Maclean | LOCKNUT, 5/8" SQ MF | MF5 |
| MFH60 | Hughes Brothers | LOCKNUT, 5/8" HEX MF | MF5-H |
| 3532 | Hubbell | LOCKNUT, 5/8" HEX MF | MF5-H |
| MF70 | Hughes Brothers | LOCKNUT, 3/4" SQ MF | MF6 |
| 3513 | Hubbell | LOCKNUT, 3/4" SQ MF | MF6 |
| J8584 | Maclean | LOCKNUT, 3/4" SQ MF | MF6 |
| MF80 | Hughes Brothers | LOCKNUT, 7/8" SQ MF | MF7 |
| 3514 | Hubbell | LOCKNUT, 7/8" SQ MF | MF7 |
| J8584-1/2 | Maclean | LOCKNUT, 7/8" SQ MF | MF7 |
| MFH80 | Hughes Brothers | LOCKNUT, 7/8" HEX MF | MF7-H |
| MF100 | Hughes Brothers | LOCKNUT, 1" SQ MF | MF8 |
| 3515 | Hubbell | LOCKNUT, 1" SQ MF | MF8 |
| J8585 | Maclean | LOCKNUT, 1" SQ MF | MF8 |
| AB1228-8 | Hughes Brothers | BOLT, MACHINE HEX 1-1/4" X 28" | MH10028-6S |
| HB35-1-1/2 | Hughes Brothers | BOLT, MACHINE HEX 3/8" X 5", 1-1/2" TH | MH3050-1.4 |
| BT51-1/2 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 1-1/2" | MH4014-1.2 |
| PSHB120150 | Hubbell | BOLT, MACHINE HEX 1/2" X 1-1/2" | MH4014-1.2 |
| BT52 | Hughes Brothers | BOLT, MACHINE HEX 1/2"-13UNC X 2", HN | MH4020-4S |
| HB53-1-1/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 3" | MH4030-1.2 |
| PSHB120300 | Hubbell | BOLT, MACHINE HEX 1/2" X 3" | MH4030-1.2 |
| HB53-1/2-1-3/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 3-1/2", 1-3/4" TH | MH4034-1.6 |
| PSHB120350 | Hubbell | BOLT, MACHINE HEX 1/2" X 3-1/2", 1-3/4" TH | MH4034-1.6 |
| HB53-7/8 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 3-7/8" | MH4037-1.1 |
| HB54-1/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 4-1/4" | MH4042-1.2 |
| HB54-1/2-1-1/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 4-1/2" | MH4044-1.2 |
| HB54-3/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 4-3/4" | MH4046-1.4 |
| HB55-1-3/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 5" | MH4050-3 |
| HB55-1/4 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 5-1/4" | MH4052-1.0 |
| HB56-1/2 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 6-1/2" | MH4064-1.2 |
| HB57-3 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 7" | MH4070-3 |
| HB58-1/2 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 8-1/2" | MH4084-1.4 |
| HB59-1/2 | Hughes Brothers | BOLT, MACHINE HEX 1/2" X 9-1/2" | MH4094-4 |
| PSHB580225 | Hubbell | BOLT, MACHINE HEX 5/8" X 2-1/4" A-325 HN | MH5022-325H |
| PSHB580250 | Hubbell | BOLT, MACHINE HEX 5/8" X 2-1/2" A-325 HN | MH5024-325H |
| HB714-2 | Hughes Brothers | BOLT, MACHINE HEX 3/4" X 14", SN | MH6140-325-6S |
| HB718-2 | Hughes Brothers | BOLT, MACHINE HEX 3/4"-10 X 18", HN | MH6180-6S |
| AB1220-6 | Hughes Brothers | BOLT, MACHINE HEX 1-1/4" X 20", HN | MH8200-325-6S |
| AB1222-6 | Hughes Brothers | BOLT, MACHINE HEX 1-1/4" X 22", HN | MH8220-325-6S |
| AB1224-8 | Hughes Brothers | BOLT, MACHINE HEX 1-1/4" X 24", HN | MH8240-325-6S |
| N Series | Hughes Brothers | Square Nuts | N Series |
| HN30 | Hughes Brothers | NUT, 3/8" HEX | N3-H |
| N50 | Hughes Brothers | NUT, 1/2" SQ | N4 |
| 55083P | Hubbell | NUT, 1/2" SQ | N4 |
| J8562 | Maclean | NUT, 1/2" SQ | N4 |
| HN50 | Hughes Brothers | NUT, 1/2" HEX | N4-H |
| N60 | Hughes Brothers | NUT, 5/8" SQ | N5 |
| 55084P | Hubbell | NUT, 5/8" SQ | N5 |
| J8563 | Maclean | NUT, 5/8" SQ | N5 |
| N70 | Hughes Brothers | NUT, 3/4" SQ | N6 |
| 55085P | Hubbell | NUT, 3/4" SQ | N6 |
| J8564 | Maclean | NUT, 3/4" SQ | N6 |
| N80 | Hughes Brothers | NUT, 7/8" SQ | N7 |
| 56538P | Hubbell | NUT, 7/8" SQ | N7 |
| J8564-1/2 | Maclean | NUT, 7/8" SQ | N7 |
| N100 | Hughes Brothers | NUT, 1" SQ | N8 |
| 56073P | Hubbell | NUT, 1" SQ | N8 |
| 2719 Series | Hughes Brothers | Oval Eye Bolts | OE Series |
| A1895.1A | Hughes Brothers | POLE BEARING PLATE, 15/16 MH | PB-100-7 |
| 3103.6 | Hughes Brothers | POLE BAND, 9-12 DIA, 4-WAY 90 DEG | PB3103-6 |
| 3103.7 | Hughes Brothers | POLE BAND, 11-14 DIA, 4-WAY 90 DEG | PB3103-7 |
| 3103.8 | Hughes Brothers | POLE BAND, 13-16 DIA, 4-WAY 90 DEG | PB3103-8 |
| 3105.5 | Hughes Brothers | POLE BAND, 7-10 DIA, 4-WAY 90 DEG | PB3105-5 |
| 3105.6 | Hughes Brothers | POLE BAND, 9-12 DIA, 4-WAY 90 DEG | PB3105-6 |
| 3105.7 | Hughes Brothers | POLE BAND, 11-14 DIA, 4-WAY 90 DEG | PB3105-7 |
| 3107.5 | Hughes Brothers | POLE BAND, 8-10 DIA, 1-1/4, 180 DEG | PB3107-5 |
| 3107.6 | Hughes Brothers | POLE BAND, 10-12 DIA, 1, 1-1/4, 180 DEG | PB3107-6 |
| 3107.7 | Hughes Brothers | POLE BAND, 12-14 DIA, 1, 1-1/4, 180 DEG | PB3107-7 |
| 3107.8 | Hughes Brothers | POLE BAND, 14-16 DIA, 2-WAY, HVY, 30 DEG | PB3107-8 |
| 3107.9 | Hughes Brothers | POLE BAND, 16-18 DIA, 2-WAY, HVY, 30 DEG | PB3107-9 |
| 3108.5 | Hughes Brothers | POLE BAND, 7-10 DIA, 2-WAY 180 DEG | PB3108-5 |
| 3108.6 | Hughes Brothers | POLE BAND, 9-12 DIA, 2-WAY 180 DEG | PB3108-6 |
| 3108.7 | Hughes Brothers | POLE BAND, 11-14 DIA, 2-WAY 180 DEG | PB3108-7 |
| 3108.8 | Hughes Brothers | POLE BAND, 13-16 DIA, 2-WAY 180 DEG | PB3108-8 |
| 3108.9 | Hughes Brothers | POLE BAND, 15-18 DIA, 2-WAY 180 DEG | PB3108-9 |
| 1263-A | Hughes Brothers | GRID GAIN 4" X 4", 15/16 HOLE | PX122 |
| GGSF4040-7 | Maclean | GRID GAIN 4" X 4", 15/16 HOLE | PX122 |
| 1263-AB | Hughes Brothers | GRID GAIN 4" X 4", 15/16 HOLE BONDED | PX122B |
| 1260-A | Hughes Brothers | GRID GAIN 4-1/2" X 9", (3)-15/16 H | PX260 |
| 1260-AB | Hughes Brothers | GRID GAIN 4-1/2" X 9", (3)-15/16 H,1B | PX260B |
| 1261-A | Hughes Brothers | GRID GAIN 4" X 6-3/4", 15/16 HOLE | PX261 |
| GGSF6640-7 | Maclean | GRID GAIN 4" X 6-3/4", 15/16 HOLE | PX261 |
| 1261-B | Hughes Brothers | GRID GAIN 4" X 6-3/4", 1-1/16 HOLE | PX261A |
| 1261-AB | Hughes Brothers | GRID GAIN 4" X 6-3/4", 15/16 H BONDED | PX261B |
| 28082 | Hughes Brothers | ROLLER, GUY 2-5/8" D X 7/8", 15/16" H | R-26-7 |
| R-26-7 | Maclean | ROLLER, GUY 2-5/8" D X 7/8", 15/16" H | R-26-7 |
| 28083 | Hughes Brothers | ROLLER, GUY 3-1/4" X 1", 1-1/16" H | R-31-1 |
| TG-92-1 | Hughes Brothers | GUY LINK ASSY | REA-TG-92-1 |
| RW2-60 | Hughes Brothers | WSHR, ROUND, 11/16" HOLE, 2" | RW2-60 |
| RW1-30 | Hughes Brothers | WSHR, ROUND, 7/16" HOLE, 1" OD | RW3-10 |
| RW3-80 | Hughes Brothers | WSHR, ROUND, 11/16" HOLE, 3" | RW3-80 |
| RW1-3/8-50 | Hughes Brothers | WSHR, ROUND, 9/16" H, 1-3/8" OD | RW4-13 |
| J1086 | Maclean | WSHR, ROUND, 9/16" H, 1-3/8" OD | RW4-13 |
| RW2-70 | Hughes Brothers | WSHR, ROUND, 13/16" HOLE, 2" OD | RW6-20 |
| 6806 | Hubbell | WSHR, ROUND, 13/16" HOLE, 2" OD | RW6-20 |
| J1089 | Maclean | WSHR, ROUND, 13/16" HOLE, 2" OD | RW6-20 |
| RW2-80 | Hughes Brothers | WSHR, ROUND, 15/16" H, 2-1/4" OD | RW7-22 |
| RW3-100 | Hughes Brothers | WSHR, FLAT, 1-1/6" ID X 3" OD X 1/4" THICK | RW8-30 |
| CW Series | Hughes Brothers | Square Curved Washers | SCW Series |
| SCW Series | Hughes Brothers | Square Curved Washers | SCW Series |
| CW100-1/2 | Hughes Brothers | WSHR, SQ CURV, 4" X 4", 1-1/16" H | SCW4-404 |
| SCW3-60 | Hughes Brothers | WSHR, SQ CURV 3" X 1/4", 11/16" H | SCW5-304 |
| 682312 | Hubbell | WSHR, SQ CURV 3" X 1/4", 11/16" H | SCW5-304 |
| J113 | Maclean | WSHR, SQ CURV 3" X 1/4", 11/16" H | SCW5-304 |
| SCW4-70 | Hughes Brothers | WSHR, SQ CURV 4" X 1/4", 13/16" H | SCW6-404 |
| J6836 | Maclean | WSHR, SQ CURV 4" X 1/4", 13/16" H | SCW6-404 |
| SCW4-80 | Hughes Brothers | WSHR, SQ CURV 4" X 1/4", 15/16" H | SCW7-404 |
| 680912 | Hubbell | WSHR, SQ CURV 4" X 1/4", 15/16" H | SCW7-404 |
| J6829 | Maclean | WSHR, SQ CURV 4" X 1/4", 15/16" H | SCW7-404 |
| CW100-3/8 | Hughes Brothers | WSHR, SQ CURV 4" X 3/8", 1-1/16" H | SCW8-406 |
| 2720 Series | Hughes Brothers | Shoulder Eye Bolts | SE Series |
| 2720.710-4 | Hughes Brothers | BOLT, SHLD EYE 3/4" X 10" | SE6100-4 |
| J9530 | Maclean | BOLT, SHLD EYE 3/4" X 10" | SE6100-4 |
| 2720.712-4 | Hughes Brothers | BOLT, SHLD EYE 3/4" X 12" | SE6120-6 |
| 2720.714-6 | Hughes Brothers | BOLT, SHLD EYE 3/4" X 14", SN | SE6140-6S |
| 2720.718-6 | Hughes Brothers | BOLT, SHLD EYE, 3/4" X 18", SN | SE6180-6S |
| 2720.720-6 | Hughes Brothers | BOLT, SHLD EYE 3/4" X 20", SN | SE6200-6S |
| 2720.722-6 | Hughes Brothers | BOLT, SHLD EYE, 3/4" X 22", SN | SE6220-6S |
| 2720.724-6 | Hughes Brothers | BOLT, SHLD EYE, 3/4" X 24", SN | SE6240-6S |
| SW Series | Hughes Brothers | Square Flat Washers | SFW Series |
| SW2-50-1/8 | Hughes Brothers | WSHR, SQ FLAT 2" X 2" | SFW4-404 |
| 6811 | Hubbell | WSHR, SQ FLAT 2" X 2" | SFW4-404 |
| SW3-70 | Hughes Brothers | WSHR, SQ FLAT 3" X 1/4", 13/16" H | SFW6-304 |
| 6817 | Hubbell | WSHR, SQ FLAT 3" X 1/4", 13/16" H | SFW6-304 |
| J1079 | Maclean | WSHR, SQ FLAT 3" X 1/4", 13/16" H | SFW6-304 |
| SW4-70 | Hughes Brothers | WSHR, SQ FLAT 4" X 1/4", 13/16" H | SFW6-404 |
| SW4-80 | Hughes Brothers | WSHR, SQ FLAT 4" X 1/4", 15/16" H | SFW7-404 |
| 6819 | Hubbell | WSHR, SQ FLAT 4" X 1/4", 15/16" H | SFW7-404 |
| J1082 | Maclean | WSHR, SQ FLAT 4" X 1/4", 15/16" H | SFW7-404 |
| 2702 Series | Hughes Brothers | Spring Washers | SW Series |
| 2702.5 | Hughes Brothers | WSHR, STATIC SPRING 1/2" | SW4 |
| 3539 | Hubbell | WSHR, STATIC SPRING 1/2" | SW4 |
| J3539 | Maclean | WSHR, STATIC SPRING 1/2" | SW4 |
| 2702.7 | Hughes Brothers | WSHR, STATIC SPRING 3/4" | SW6 |
| 3541 | Hubbell | WSHR, STATIC SPRING 3/4" | SW6 |
| J3541 | Maclean | WSHR, STATIC SPRING 3/4" | SW6 |
| 2702.8 | Hughes Brothers | WSHR, STATIC SPRING 7/8" | SW7 |
| C2050436 | Hubbell | WSHR, STATIC SPRING 7/8" | SW7 |
| J3542 | Maclean | WSHR, STATIC SPRING 7/8" | SW7 |
| 2702.1 | Hughes Brothers | WSHR, STATIC SPRING 1" | SW8 |
| J3543 | Maclean | WSHR, STATIC SPRING 1" | SW8 |
| AS2545 Series | Hughes Brothers | Turnbuckles | TB Series |
| AS2545-B | Hughes Brothers | TURNBUCKLE, 3/4" X 9", JAW/EYE, BNK | TB609-JE |
| TB34JE9BNKLN | Hubbell | TURNBUCKLE, 3/4" X 9", JAW/EYE, BNK | TB609-JE |
| AS2545-A | Hughes Brothers | TURNBUCKLE, 3/4" X 9", JAW/JAW, BNK | TB609-JJ |
| TB34JJ9BNKLN | Hubbell | TURNBUCKLE, 3/4" X 9", JAW/JAW, BNK | TB609-JJ |
| AS2545-BBB | Hughes Brothers | TURNBUCKLE, CLEVIS-EYE, 23" TO 33", 3/4 DIA, 26K LB ULT, 12" RANGE, WITH JAM NUT AND BOLT-NUT-COTTER PIN. | TB612-EE |
| AS2545-FF | Hughes Brothers | TURNBUCKLE, 3/4" X 12", JAW/JAW, BNK | TB612-JJ |
| TB34JJ12BNKLN | Hubbell | TURNBUCKLE, 3/4" X 12", JAW/JAW, BNK | TB612-JJ |
| AS2545-D | Hughes Brothers | TURNBUCKLE, 7/8" X 12", JAW/EYE, BNK | TB712-JE |
| TB78JE12BNKLN | Hubbell | TURNBUCKLE, 7/8" X 12", JAW/EYE, BNK | TB712-JE |
| AS2545-E | Hughes Brothers | TURNBUCKLE, 1" X 12", JAW/JAW, BNK | TB812-JJ |
| TB1JJ12BNKLN | Hubbell | TURNBUCKLE, 1" X 12", JAW/JAW, BNK | TB812-JJ |
| LW Series | Hughes Brothers | Tapped Lip Washers | TLW Series |
| WB Series | Hughes Brothers | Washerhead Bolts | W Series |
| WB54-1/2-1-1/4 | Hughes Brothers | BOLT, WA HD 1/2" X 4-1/2" | W4044-3 |
| WB55-1-1/4 | Hughes Brothers | BOLT, WA HD 1/2" X 5" | W4050-3 |
| WB55-1/2-1-1/4 | Hughes Brothers | BOLT, WA HD 1/2" X 5-1/2" | W4054-3 |
| WB56-1/2 | Hughes Brothers | BOLT, WA HD 1/2" X 6-1/2" | W4064-3 |
| WB57-3 | Hughes Brothers | BOLT, WA HD 1/2" X 7" | W4070-3 |
| WB57-1/2 | Hughes Brothers | BOLT, WA HD 1/2" X 7-1/2" | W4074-3 |
| WB58-1/2 | Hughes Brothers | BOLT, WA HD 1/2" X 8-1/2" | W4084-4 |
| WB59-4 | Hughes Brothers | BOLT, WA HD 1/2" X 9" | W4090-4 |
| WB59-1/2 | Hughes Brothers | BOLT, WA HD 1/2" X 9-1/2" | W4094-3 |
| WB510-4 | Hughes Brothers | BOLT, WA HD 1/2" X 10" | W4100-4 |
| WB510-1/2 | Hughes Brothers | BOLT, WA HD 1/2" X 10-1/2" | W4104-4 |
| WB511 | Hughes Brothers | BOLT, WA HD 1/2" X 11" | W4110-4 |
| WB512-4 | Hughes Brothers | BOLT, WA HD 1/2" X 12" | W4112-4 |
| WB513 | Hughes Brothers | BOLT, WA HD 1/2" X 13" | W4130-6 |
| WB64-1-3/4 | Hughes Brothers | BOLT, WA HD 5/8" X 4" | W5040-3 |
| WB64-1/2 | Hughes Brothers | BOLT, WA HD 5/8" X 4-1/2" | W5044-3 |
| WB65-1-3/4 | Hughes Brothers | BOLT, WA HD 5/8" X 5" | W5050-3 |
| WB65-1/2 | Hughes Brothers | BOLT, WA HD 5/8" X 5-1/2" | W5054-2.4 |
| WB67-3 | Hughes Brothers | BOLT, WA HD 5/8" X 7" | W5070-3 |
| WB67-1/2 | Hughes Brothers | BOLT, WA HD 5/8" X 7-1/2" | W5074-3 |
| WB68-1/2 | Hughes Brothers | BOLT, WA HD 5/8" X 8-1/2" | W5084-4 |
| WB69-1/2 | Hughes Brothers | BOLT, WA HD 5/8" X 9-1/2" | W5094-4 |
| WB610-4 | Hughes Brothers | BOLT, WA HD 5/8" X 10" | W5100-4 |
| WB610-1/2 | Hughes Brothers | BOLT, WA HD 5/8" X 10-1/2" | W5104-4 |
| WB612-4 | Hughes Brothers | BOLT, WA HD 5/8" X 12" | W5120-6 |
| WB613 | Hughes Brothers | BOLT, WA HD 5/8" X 13" | W5130-6 |
| WB614-6 | Hughes Brothers | BOLT, WA HD 5/8" X 14" | W5140-6 |
| WB616-6 | Hughes Brothers | BOLT, WA HD 5/8" X 16" | W5160-6 |
| WB75-1-3/4 | Hughes Brothers | BOLT, WA HD 3/4" X 5" | W6050-3 |
| WB79 | Hughes Brothers | BOLT, WA HD 3/4" X 9" | W6090-4 |
| WB710-4 | Hughes Brothers | BOLT, WA HD 3/4" X 10" | W6100-4 |
| WB711 | Hughes Brothers | BOLT, WA HD 3/4" X 11" | W6110-4 |
| WB713 | Hughes Brothers | BOLT, WA HD 3/4" X 13" | W6130-6 |
| WB718-6 | Hughes Brothers | BOLT, WA HD 3/4" X 18" | W6180-6 |
| WB810-3 | Hughes Brothers | BOLT, WA HD 7/8" X 10" | W7100-4 |
| WB811 | Hughes Brothers | BOLT, WA HD 7/8" X 11" | W7110-4 |
| 2745 Series | Hughes Brothers | Welded Washer Nuts | WN Series |
| 2745.5 | Hughes Brothers | WASHERNUT, 1/2" | WN4 |
| 3193 | Hubbell | WASHERNUT, 1/2" | WN4 |
| 2745.6 | Hughes Brothers | WASHERNUT, 5/8" | WN5 |
| 3194 | Hubbell | WASHERNUT, 5/8" | WN5 |
| J9802 | Maclean | WASHERNUT, 5/8" | WN5 |
| 2745.7 | Hughes Brothers | WASHERNUT, 3/4" | WN6 |
| 3195 | Hubbell | WASHERNUT, 3/4" | WN6 |
| J9803 | Maclean | WASHERNUT, 3/4" | WN6 |
| 2745.8 | Hughes Brothers | WASHERNUT, 7/8" | WN7 |